Tried a heat gun on a fridge door gasket in Tulsa and made it worse, hear me out
Everyone on the forums swears by softening a stubborn gasket with a heat gun, so I gave it a shot on a 2019 Frigidaire last month. Wound up warping the corner so bad the door wouldn't seal at all and I had to eat the cost of a new gasket at $68. Turns out a hair dryer on low with a damp rag works way better and doesn't cook the rubber. Anyone got a safer trick for getting these to sit flat?
Damp rag trick is solid. What worked for me on a warped corner was pulling the gasket off, soaking it in hot tap water for a few minutes, then laying it flat on the counter with a book on the bent corner overnight. Rubber has memory, so you have to let it cool in the right shape instead of forcing it hot. Also check the hinge side before blaming the gasket, a sagging door will pull the seal away every time.