Why does nobody warn you about the tiny screws on a 1960s Nikkormat
Last Tuesday I finally cracked open a Nikkormat FT that had been sitting on my bench in Denver since March, and the shutter was dragging at slow speeds. I figured it was a simple clean and lube, but the screw that holds the speed dial cam in place is smaller than a grain of rice and I lost it twice on the floor. Back in the 90s we had a guy at the shop who could find dropped screws by sweeping a magnet under the bench, and I kept wishing he was around. Took me three hours to get the slow gear train running smooth again, then I dropped the tiny spring and had to start over. Does anyone have a trick for keeping those little parts from vanishing, or is a magnet and a lot of luck still the way?
Keeping a magnet handy is fine, but I would skip the lucky guess and work on a tray from the start. A white towel or a baking sheet with a lip catches most of what you drop, and the light color makes the little bits easy to spot. For screws that small, a dab of watchmaker's wax or a bit of rodico on the screwdriver tip holds them in place so they never get airborne in the first place. Honestly, the real fix is working slower on those old Nikkormats and never taking the cam screw out over open floor. A magnet sweep is a good backup, but it should not be your first plan.