Pro tip: that power stretcher kickback in Fresno taught me to check the pole before every room
Last Saturday I was finishing a 12 by 15 bedroom in Fresno and right as I leaned into a stretch near the closet door, the pole slipped and the whole thing snapped back and caught me just under the knee. I had 40 yards of berber already glued down in the hall so I couldn't just stop, and I remember standing there deciding if I could keep going or not. I wrapped my knee with the tape from my van, limped through the last two rooms, and finished around 7pm with a knot the size of a plum. Turned out the pole lock pin was worn and I had been meaning to swap it out for a couple weeks. A $30 part almost cost me a whole work week. Now I do a shake test on the pole before every room, not just the first one. Any of you got a quick check routine you run before you fire up the stretcher, or do you just replace parts on a schedule?